Fire Risk Assessment HubIndependent guides to fire risk assessments: the law, costs and choosing a competent assessor
Fire Risk Assessment Hub is an independent guide. We are not a fire and rescue service or any kind of fire authority, and we don't carry out fire risk assessments ourselves. If you ask us to, we'll put you in touch with one fire risk assessor or fire safety consultancy from our partners that covers your area.
Guide · reviewed 14 November 2026

How to choose a competent fire risk assessor

To choose a competent fire risk assessor, check three things: evidence of competence from a register or certification scheme you can look up yourself, real experience of premises like yours, and a written scope that gives them access to every area. The law leaves the responsibility with you whoever does the work, so keep a record of how you chose.

  • What "competent" means in law today, and what hasn't come into force yet
  • Professional body registration vs third-party certification, and how to check each
  • The checks to make, the questions to ask, and what to record when you appoint

By the Fire Risk Assessment Hub editorial team · Last reviewed

  • Independent guide
  • Free and no obligation
  • For UK businesses, landlords and organisations
  • ICO registration ZA810991

Find a fire risk assessor who covers your area

Free and no obligation. Takes about a minute.

For UK businesses, landlords and organisations. We aren't a fire authority and we don't carry out assessments ourselves. Your enquiry goes to one partner only, chosen by your postcode and type of premises. Prices and terms are agreed directly with them; there's no obligation.

Choosing a fire risk assessor: key facts

  • You can do your own fire risk assessment if you're competent to do it. The Home Office says this is common in small premises, and publishes simple guides for them.
  • If you can't do it yourself, the Home Office "strongly recommends" a professional fire risk assessor, competent for your type of premises and its risks, not just for assessments in general.
  • There is no legal requirement in force today for a fire risk assessor to hold a particular qualification or certification. Article 9A of the Fire Safety Order, which covers assessor competence, has been written in by the Building Safety Act 2022 but is not yet in force.
  • Competence can be shown in two main ways: registration with a professional body, or certification by a certification body accredited by UKAS for that activity (Fire Sector Federation guide).
  • Fire and rescue authorities don't carry out fire risk assessments, but they may advise you on how to find competent help (NFCC).
  • You stay liable in law if the assessment isn't suitable and sufficient, even when a fire risk assessor wrote it (Home Office guide, paragraph 3.17).
  • In England and Wales you must record the identity of anyone you engage to make or review your fire risk assessment (Building Safety Act 2022, section 156, from 1 October 2023).
  • Keep a record of the steps you took to choose your fire risk assessor. Both the Home Office and NFCC advise it.

Do you need a fire risk assessor, or can you do it yourself?

The law doesn't make you hire anyone. In England and Wales the Home Office says a responsible person can carry out their own fire risk assessment if they're competent, which is common in small premises. If you can't, it strongly recommends a professional fire risk assessor.

The duty to carry out a fire risk assessment sits with the responsible person (in Scotland, the dutyholder). Nothing in the law says it must be done by an outside firm. The Home Office guide for people with duties under fire safety law says responsible persons "can carry out their own fire risk assessments if they are competent to do so". In small premises, it says, the assessment is commonly done by the owner or occupier.

The Fire Sector Federation's Guide to Choosing a Competent Fire Risk Assessor (version 3, October 2020) gives a practical test. Before doing it yourself, be satisfied you can:

The guide points out an advantage of doing it in house: you own and understand the precautions. It also says you need to know your limits. If you don't have the knowledge, or the time to do the job properly, appoint a specialist and stay closely involved.

Premises where people sleep, where vulnerable people are cared for, or where processes create a significant fire hazard are different. The Home Office says using a registered or certificated assessor is "particularly important" there.

The fire service won't do it for you. NFCC says fire and rescue authorities "do not complete fire risk assessments", but they may advise you on how to find competent help. You can still approach your local fire and rescue service for advice.

What does "competent" mean for a fire risk assessor?

The Fire Safety Order defines a competent person as someone with "sufficient training and experience or knowledge and other qualities". A specific competence duty for anyone helping with the fire risk assessment (article 9A) has been added to the Order but is not yet in force.

In England and Wales, article 18 of the Regulatory Reform (Fire Safety) Order 2005 is in force. It requires the responsible person to appoint one or more competent persons to help with the preventive and protective measures. It treats someone as competent where they have "sufficient training and experience or knowledge and other qualities". If you have a competent person on your own staff, you must appoint them in preference to someone outside.

The Building Safety Act 2022 (section 156) also wrote a new article 9A into the Order, about the competence of anyone appointed to help make or review a fire risk assessment. Article 9A is not in force. When we checked legislation.gov.uk on 14 November 2026, the commencement notes for section 156 didn't include it, and the article itself wasn't published as in-force law. The Home Office's section 156 factsheet says it "will be brought into force at a later date", and recommends you make sure any assessor you appoint is competent in the meantime.

So no law yet requires a fire risk assessor to hold a particular qualification or certificate. Your assessment must still be "suitable and sufficient" (article 9), and you're liable if it isn't.

Where the rules are heading

What competence looks like in practice

The Fire Risk Assessment Competency Council (FRACC) published competency criteria for fire risk assessors, and NFCC links to them. NFCC suggests asking an assessor for evidence that they meet those criteria. Two cautions from the Home Office guide are worth remembering:

The guide also treats recognising the limits of your own abilities, and seeking outside advice, as a sign of competence (paragraph 13.5).

Professional body registration or third-party certification: what's the difference?

Professional body registration checks an individual assessor. Third-party certification by a UKAS-accredited certification body can check either an individual or a whole company, including its management systems. The Fire Sector Federation guide recommends using companies (including sole traders) with third-party certification.

The Fire Sector Federation guide describes two main ways a fire risk assessor can show competence: registration with a professional body, and certification by a certification body that UKAS has accredited for that activity. UKAS (the United Kingdom Accreditation Service) is the national accreditation body recognised by government. It accredits certification bodies to confirm they assess correctly against a scheme's requirements.

The guide also stresses that the company the assessor works for needs proper management systems, even if the assessor is self-employed. Its recommendation is to use only fire risk assessment companies, including sole traders, that are third-party certificated by a UKAS-accredited certification body. The Home Office guide (paragraph 3.11) is a little wider. It advises giving preference to certificated companies, or to individuals who are certificated under a recognised scheme or registered by a professional body.

The guide's appendix (2020) lists these schemes. Schemes change, so check the current register on the scheme owner's own website rather than relying on this list.

Type of schemeWho runs itWhat it looks atListed in the 2020 guide
Company certification schemeA certification body accredited by UKASThe competence of the company's staff and its management systemsBAFE SP205 (delivered by NSI and SSAIB); IFC Certification Ltd IFCC 0099; Warrington Testing and Certification Ltd FRACS (Company)
Person certification schemeA certification body accredited by UKASThe competence of the individual, not the companyWarrington Testing and Certification Ltd FRACS (Individuals)
Professional body registrationA professional bodyThe competence of the individual, not the companyInstitution of Fire Engineers (IFE); Institute of Fire Safety Managers (IFSM); Institute of Fire Prevention Officers (IFPO)

All of these schemes keep a register listing the people or companies that have been assessed as meeting their requirements. None of them is a legal requirement today. They're evidence you can check.

What company certification adds

BAFE's own page on its SP205 Life Safety Fire Risk Assessment scheme describes some of what certification involves. Providers must run a management system covering the whole service. Each assessor's competence is established when they're first appointed and reviewed at least every 36 months. Assessors must show evidence of fire safety experience, training records, successful use of their knowledge, and documented continuing professional development. Every assessment done under the scheme is checked and signed off by a designated validator in the certificated organisation before it reaches the client.

That validation step is the practical difference for you: someone other than the assessor has checked the report.

Get a quote from a fire risk assessor

Tell us about your premises and we'll pass your enquiry to one fire risk assessor or fire safety consultancy from our partners that covers your area. Check their registration or certification yourself before you appoint.

For UK businesses, landlords and organisations. We aren't a fire authority and we don't carry out assessments ourselves. Your enquiry goes to one partner only, chosen by your postcode and type of premises. Prices and terms are agreed directly with them; there's no obligation.

How do you check a fire risk assessor is on a register?

Look the assessor or company up yourself on the scheme owner's public register, using the name on their quote. Don't rely only on a logo on a website or a certificate number in an email.

A logo on a website isn't evidence. The register is. Every scheme in the Fire Sector Federation guide keeps one, and the scheme owners' own sites explain how to use them.

  1. Ask which scheme and which body. Ask the assessor to tell you in writing which register or certification scheme they're on, and whether it covers the individual, the company, or both.
  2. Go to the scheme owner's own site. BAFE says you can search the BAFE Fire Safety Register for "Fire Risk Assessment" to find SP205-certificated providers. The IFE's "Find an IFE Professional" directory has a search for fire risk assessors who are Engineering Council registrants and have met the requirements for its Fire Risk Assessors Register. The IFSM and IFPO each say on their own sites that they run a tiered register of fire risk assessors.
  3. Match the name exactly. Check the company name (and company number, if shown) on the register matches the one on your quote and contract. A certificated parent company or a registered individual doesn't automatically cover a different firm.
  4. Check the scope. If the register shows what the person or company is certificated or registered for, make sure it fits your premises. Tiered registers exist because not every assessor is suited to every building.
  5. Save the evidence. Screenshot or print the register entry with the date you checked. It goes in your selection record.
Specifying it in a tender? BAFE suggests wording such as "Third Party Certification/BAFE Registration to the BAFE SP205 Life Safety Fire Risk Assessment Scheme". You can ask for the equivalent evidence for any other scheme. If you name only one scheme, you may rule out an assessor who is competent through a different route, so consider whether that's what you want.

What checks should you make before appointing a fire risk assessor?

NFCC and the Home Office give the same core list: evidence of competence, experience of your type of premises, a clear written scope with access to all areas, comparable quotes, references from similar clients, proof of insurance, impartiality and a complaints procedure, and a record of how you chose.

The Home Office guide says that even if you choose an assessor from a register, it's still advisable to make further checks (paragraph 3.16). NFCC's page on finding a fire risk assessor and the Fire Sector Federation guide set out almost the same steps. Here they are in one place.

Checklist before you appoint a fire risk assessor
  • Evidence of competence: registration or certification you've checked on the register yourself, and evidence against the FRACC competency criteria if you want more.
  • Experience and training for your kind of business and premises, not just assessments in general.
  • A scope of work agreed in writing: which buildings and areas, which type of assessment, what the report will contain and when.
  • Access to all areas of the premises and all relevant information (plans, previous assessments, maintenance and test records).
  • Alternative quotes that all cover the same scope, so you can compare like with like.
  • References from previous clients with similar premises. Ask whether they were satisfied and whether the fire and rescue authority later found problems.
  • Proof of professional indemnity insurance and public liability insurance.
  • Assurance that the assessor is impartial, and a complaints procedure you can use.
  • A record of the steps you took to choose them, kept with your fire risk assessment.

Getting the scope right

Put in writing which parts of the building are included, whether the assessor needs access to locked areas, roof spaces or plant rooms, and who will arrange it. If you manage a block of flats, agree whether the assessment will look inside any flats or only at the common parts and the flat entrance doors from the outside. Your quote will depend on this, which is why the guides tell you to compare quotes for the same scope. See what affects the cost of a fire risk assessment.

Why the references question is specific

NFCC doesn't just suggest asking whether a past client was happy. It suggests asking whether any problems were later identified by the fire and rescue authority. That's a sharper test: a report that pleased the client but missed something an inspecting officer found later is what you're trying to avoid.

Find a fire risk assessor who covers your area Free and no obligation. Takes about a minute.
Get a fire risk assessment quote

Why does experience of your type of premises matter?

Because fire risk depends on the building and the people in it. The Home Office warns that an assessor experienced with offices, factories and shops may not have enough experience for a care home, a high-rise block of flats or a historic building.

The Home Office guide is direct about this. You must make sure an assessor is competent "not just to carry out fire risk assessments generally, but for your type of premises, and the risk associated with them" (paragraph 3.9). It gives the example of an assessor with plenty of experience of offices, factories and shops who might not have enough experience for a residential care home, a high-rise block of flats or a heritage building, and vice versa.

Ask each assessor how many assessments they've done in buildings like yours, and ask for references from those clients. Some premises raise questions that need particular experience:

External walls of blocks of flats

In England and Wales, where a building contains two or more sets of domestic premises, the fire risk assessment covers the structure and external walls, including windows, doors and anything attached such as balconies. The Fire Sector Federation guide says some cases are straightforward enough for a competent fire risk assessor with adequate fire safety experience and knowledge of external wall systems. More complex cases need advice from a qualified engineer with relevant fire safety and fire engineering experience, such as a Chartered Engineer registered with the Engineering Council. Ask any assessor for a block how they would handle the external walls, and whether they'd tell you if specialist input was needed. More on this in fire risk assessments for blocks of flats.

What should make you ask more questions before you appoint?

Ask more if an assessor won't visit, can't show a registration or certification you can check, won't agree a written scope, or also wants to sell you the equipment their report recommends. None of these proves a problem on its own, but each deserves a clear answer.

These aren't claims about the industry. They're situations where the official guidance gives you a reason to ask, and where a good assessor should have a ready answer.

If you notice thisAsk thisWhy it matters
A quote without a visit, or a visit that won't include every area"Will you inspect every part of the premises? Which areas are excluded, and why?"NFCC and the Home Office both say the assessor should have access to all areas and relevant information.
No register, or a logo you can't find on the scheme's register"Which scheme are you on, as an individual or company, and under what name?"Registers let you check competence independently. It's hard to judge it otherwise (Home Office 3.14).
A sample report that looks generic"Can I see an anonymised report for premises like mine? How do you record findings specific to my building?"The assessment must be suitable and sufficient for your premises. BAFE's SP205 scheme requires reports to record every significant detail found.
The same firm offers to supply or fit what the report recommends"How do you keep the assessment impartial? Can I use any competent contractor for the work?"NFCC suggests seeking assurance that the assessor is impartial.
Pressure to sign quickly, or a scope that keeps changing"Can you confirm the scope, report contents and timescale in writing?"Both guides say to agree the scope and compare quotes on the same scope.
No insurance documents or complaints route"Can you send current professional indemnity and public liability certificates, and your complaints procedure?"Both are on the NFCC and Fire Sector Federation checklists.

If you're reviewing an existing report, the Fire Sector Federation guide notes you can approach your local fire and rescue service for advice if you're concerned about whether your fire risk assessment is suitable.

Ready to compare a fire risk assessor's quote?

We'll pass your enquiry to one fire risk assessor or fire safety consultancy from our partners that covers your area. You agree the scope and price directly with them.

For UK businesses, landlords and organisations. We aren't a fire authority and we don't carry out assessments ourselves. Your enquiry goes to one partner only, chosen by your postcode and type of premises. Prices and terms are agreed directly with them; there's no obligation.

What should you record when you appoint a fire risk assessor?

In England and Wales you must record the identity of anyone you engage to make or review your fire risk assessment. Also keep a record of how you chose them: the checks you made, the quotes, the register entry and the agreed scope.

Since 1 October 2023, section 156 of the Building Safety Act 2022 has required responsible persons in England and Wales to record the name, and organisation if relevant, of anyone engaged to carry out or review the fire risk assessment. The Home Office guide says the same: if you employ someone to do the assessment for you, you must record their identity (paragraph 3.8).

That name travels with the building. In a building with two or more sets of domestic premises, the information you must give residents includes the identity of anyone appointed to help make or review the fire risk assessment (article 21A). When responsibility passes to a new responsible person, the information you must hand over includes the identity of the assessor (article 22B).

Your selection record

Separately, the Home Office and NFCC both advise keeping a record of the steps you took to choose your assessor. A simple file is enough:

Why it matters to you

The Home Office guide says the responsible person "is liable in law if the fire risk assessment is not suitable and sufficient", so you should show due diligence in making sure the assessor is competent (paragraph 3.17). It adds that if an inadequate assessment puts people at risk of death or serious injury in a fire, both the responsible person and the fire risk assessor have committed an offence (paragraph 3.18). Hiring an assessor doesn't hand over your duty. A good record shows you took reasonable care in choosing them.

Is choosing a fire risk assessor different in Scotland or Northern Ireland?

The same principles apply. The Fire Sector Federation guide covers fire safety law in all four nations, and its advice on competence, registers, scope and insurance is the same throughout the UK. The England and Wales rules on recording the assessor's identity come from the Fire Safety Order and don't apply in Scotland or Northern Ireland.

The law is different in each part of the UK, but the duty to assess fire risk exists everywhere:

The Fire Sector Federation guide is written for duty holders under all three sets of law. Its advice applies wherever you are: check independent registration or certification, look for experience of your type of premises, agree the scope in writing, compare like-for-like quotes, check insurance and keep a record of how you chose.

The section 156 changes described above (recording the assessor's identity, resident information and handover duties) amend the Fire Safety Order, so they apply in England and Wales only. In Scotland and Northern Ireland, the record-keeping rules for the assessment itself are set by their own regulations. Keeping a selection record is still sensible everywhere.

Choosing a fire risk assessor: frequently asked questions

Does a fire risk assessor have to be qualified or certified by law?

Not at the moment. Article 9A of the Fire Safety Order, on the competence of people who help with fire risk assessments, was added by the Building Safety Act 2022 but is not yet in force. The Home Office recommends you still make sure your assessor is competent, and says certification will be required in future for assessors of high-risk premises.

Can I do my own fire risk assessment?

Yes, if you're competent to do it. The Home Office says this is common in small premises and publishes simple guides to help. If you're not confident you can identify the hazards, the people at risk and the measures needed, appoint a competent fire risk assessor.

Will the fire service carry out a fire risk assessment for me?

No. NFCC says fire and rescue authorities do not complete fire risk assessments, but they may give advice on finding competent help. You can still contact your local fire and rescue service for fire safety advice.

What is the difference between registration and certification?

Professional body registration, such as with the IFE, IFSM or IFPO, checks the competence of an individual. Third-party certification by a UKAS-accredited certification body can cover an individual or a whole company, including its management systems. The Fire Sector Federation guide recommends using certificated companies, including sole traders.

Is BAFE SP205 a legal requirement?

No. BAFE SP205 is a voluntary third-party certification scheme for fire risk assessment providers. It is one way of showing competence, alongside other certification schemes and professional body registers. Check any provider on BAFE's own register.

How do I check if a fire risk assessor is registered?

Ask which scheme they're on and under what name, then search the scheme owner's own register yourself. Make sure the name on the register matches the name on your quote, and keep a dated screenshot as part of your selection record.

If I hire a fire risk assessor, am I still responsible?

Yes. The Home Office says the responsible person is liable in law if the fire risk assessment is not suitable and sufficient. That's why it advises showing due diligence when choosing an assessor and keeping a record of how you chose.

Do I need to record who carried out my fire risk assessment?

In England and Wales, yes. Since 1 October 2023 the responsible person must record the identity of anyone engaged to carry out or review the fire risk assessment. In blocks of flats, that identity is also part of the information given to residents.

What insurance should a fire risk assessor have?

NFCC suggests asking for proof of professional indemnity insurance. The Fire Sector Federation guide and the Home Office guide also mention public liability insurance. Ask to see current certificates in the name of the company you're appointing.

Does my fire risk assessor need to assess the external walls of my block?

In England and Wales, the fire risk assessment of a building with two or more flats covers the structure and external walls. The Fire Sector Federation guide says simple cases can be handled by a competent assessor with knowledge of external wall systems, but complex cases need a suitably qualified engineer.

Find a fire risk assessor who covers your area

Free and no obligation. Takes about a minute.

For UK businesses, landlords and organisations. We aren't a fire authority and we don't carry out assessments ourselves. Your enquiry goes to one partner only, chosen by your postcode and type of premises. Prices and terms are agreed directly with them; there's no obligation.

Sources

We checked the facts on this page against these sources on 14 November 2026:

This guide is general information for UK businesses, landlords and organisations, not legal or fire safety advice. Rules differ between England, Wales, Scotland and Northern Ireland. Fire Risk Assessment Hub is an independent guide. We are not a fire and rescue service or any kind of fire authority, and we don't carry out fire risk assessments ourselves. If you ask us to, we'll put you in touch with one fire risk assessor or fire safety consultancy from our partners that covers your area.

Back to the top ↑